Obtaining consistent wireless access across your whole house may be accomplished with the help of Velop routers manufactured by Linksys. On the other hand, the device does not always perform the way that it was designed to. In these situations, you should be able to follow the fundamental troubleshooting processes and strive toward a speedy resolution to the problem. If you are having problems with your Velop, you always have the option to reset the settings to their factory defaults and then, perform Linksys router login and setup from scratch. This article will provide you with information on how to reset the Linksys Velop Mesh router in several simple steps.
For your information, when you reset your router, you will lose all of your customized settings, including the WiFi name and password, as well as the security type. Many configurations, including the network’s SSID and password, the credentials for the device’s administrator, the time zone, language preferences, and connected devices, will also be removed. Following the steps in this article will allow you to return your Linksys Velop mesh router to the configurations it had when it was first purchased.
How to Reset Linksys Velop Mesh System?
Table of Contents
There are two distinct procedures for resetting your router. To learn more about this topic, please pick one of the following options:
- Hard Reset Method
- Soft Reset Method
How to Hard Reset Linksys Velop Mesh System?
- Check to see if the power button is on for your router.
- Press and hold the reset button for ten seconds.
- After some time, you may let go of the button to complete the process.
How to Soft Reset Linksys Velop Mesh System?
- Go to linksyssmartwifi.com and sign in to your account.
- After that, go to the Router Settings menu and choose Troubleshooting.
- The next step is to pick the Diagnostics tab.
- Click the link that says Reset located in the section Factory reset.
- This will return your router’s settings to their original, factory-default state.
- Choose Yes from the drop-down menu to restart the router.
- Your Linksys router is now configured using the default settings.
How to Perform Linksys Velop Setup?
Controlling and configuring your Linksys Velop Mesh router is possible with the use of the Linksys app after resetting it. Follow the instructions that are provided below to learn how to setup Linksys Velop. Also, before you begin the process of setting up, check to see if your device is accessing the network of the modem.
- The first step is to run a web browser, then in the address bar of the browser input the IP address of your router, and then hit Enter.
- Please take note that the default IP address is 192.168.1.1.
- You are also able to find out the IP address of your router by using the Linksys app.
- To finish this task, go to Dashboard.
- Select Menu > Network Administration from the drop-down menu.
- Another option is to click the link labeled “For local access,” type your administrator password into the field provided, and then pick the “Sign In” button.
You must have a recovery key with five digits. This key code is located on the product label that is attached to the router. After that, you will be prompted to input the new admin password for your router, along with the clue. A notification will appear if you have not changed the password for your router by using the Linksys app.
- You will now be brought to the dashboard of the router.
- Follow the on-screen instructions to finish the setup process.
For your information, if you ever decide to perform Linksys extender setup in your home, you can do so by referring to the guidelines given in the user manual.
Conclusion
With that, we have ended our guided written on how you can restore your Linksys Velop mesh system to its default factory mode.
