You may find that cleaning your plastic water tank is a bit of a chore. This is especially true if you are dealing with a dirty tank, but there are a few steps you can take to get it looking like new again. Read on to learn more about what you should do to get it clean.
Disinfect
If you are looking to disinfect a plastic water tank, there are a few things you need to know. First, you need to make sure that the inside of the tank is clean. This includes the walls and the floor. Then, you need to use the proper tools to properly disinfect the tank.
You should also remember to wear disposable gloves. Wearing gloves will help you protect your hands from bacteria and other organisms.
To disinfect the tank, you will need to start with a bleach solution. Mix one tablespoon of bleach for every gallon of water. Allow the bleach solution to soak in the tank for about two hours.
Once the bleach solution is ready, you will need to scrub the inside of the tank. It is important to use a bristle brush. Steel sponges are not recommended for this job.
After the interior of the tank is scrubbed, you can rinse it with hot water. You can also use a wet/dry vacuum attachment to remove the remaining liquid.
Remove remaining liquid and residue.
Table of Contents
It’s time to take stock of your water tank. Fortunately, a number of techniques are available for this type of cleanup. There are even tools that can help you do it yourself. Some models come with a washout valve that allows you to drain and refill the tank without damaging it.
If you own a plastic water tank, the best thing to do is to drain all of the water in it. Once you have emptied the liquid, it’s a matter of scrubbing and rinsing. For this job, a pressure washer can be your best friend. The power of this device comes in handy when it comes to cleaning the walls of your tank. You can also use the same tool to rinse off the sediments that may have accumulated in the bottom of your tank.
To truly clean your tank, you’ll need a good pair of gloves. You’ll also want to wear eye protection. Another useful piece of kit to have on hand is a plastic cup. These are great for containing the bleach solution that you’ll need to disinfect the water tank.
Avoid storing in the sun.
A plastic water tank deserves a little protection from the sun. Luckily, there are several ways to protect your investment.
Using a reputable manufacturer is the first step, and ensuring you purchase a water tank with a lining that is UV resistant is a must. Not only is sunlight bad for your bottles, it can also ruin your water if you’re not careful.
The best way to avoid the sun is to use shade. Although this may sound counter-intuitive, shade can mitigate some of the damage UV light can do to your precious liquids. Moreover, a shady location can help maintain the integrity of your tank for years to come.
Aside from avoiding the sun, using radiant barrier insulation is also a good way to keep your water cooler. This type of insulator uses reflective material to keep the heat at bay. Having this in place can be a godsend during the summer months.
Drain
If you want to make your plastic water tank useable again, then you have to drain it and clean it. However, you should be careful as you do this. This is because it could be home to bacteria, algae, and other microorganisms that can cause sickness. Hence, it is better to be sure that the tank is free of these.
You can start by getting a cleaning solution that you can use on the tank. For example, you can use detergent powder or hot water to wash the tank. Alternatively, you can use a power washer. But, if you do not have one, you can use a floor mop with an adjustable handle.
Before you begin the cleaning process, it is best to first empty all the liquid from the tank. Using a hosepipe is a good option to drain the tank. To ensure that the inside of the tank is squeaky clean, you can also use a vacuum cleaner.
Source: شركة تنظيف خزانات بالرياض
