The Parmak Fence Charger is the ideal solution for ensuring that your fence is always in top working condition. This device is suitable for both Solar and AC-powered systems and features low impedance circuits.
Solar-powered
Table of Contents
A Solar-powered Parmak Fence Charger is a great addition to your farm or ranch. The 6 Volt battery can operate for 21 days without sunlight, and the charger features a performance meter to show you how much power your fence is using.
This Parmak model is designed to handle small animals and pets. It features a continuous current, non-pulsing design, and two lightning arrestors on an AC line. They can be used with poly tape or high tensile multi-wire fences.
The best low impedance chargers have on-times of less than 100 microseconds. The longer the on-time, the higher the joule rating. However, you must remember that a joule rating is not a good measure of how effective a fence charger is. In fact, a joule rating does not consider peak current value, so a fencer that is rated high may have very little or no shock on the fence.
Another important feature is a sharp spike. A sharp spike is much safer to use than a joule rating. Choosing a fencer that has a sharp spike instead of a joule rating will not only help you maintain your fence, but will also help you avoid injury to yourself or your livestock.
There are several models of Parmak fencers to choose from. Some are designed for small and medium size fences, while others are ideal for large, high-tensile fences. Each model has its own performance meter. Most come with two or three lightning arrestors. These can be removed, if the fencer needs to be used during an electrical storm.
Many of these models are not U/L listed. This means that they are not covered under the CSA. You should check with the manufacturer if you are planning to buy a Parmak fencer, to make sure that you are protected against any liability. Also, you should always be aware of whether the unit is grounded properly. If it is not grounded, you could damage the fencer or cause injury to your livestock.
Parmak Solar-Paks are rust-proof and include a two-year warranty. They are also very low-impedance, and will shock through wet weeds or brush.
AC-powered
Parmak is a manufacturer of electric fences. They offer both battery operated and AC powered fence chargers. Battery operated models are less susceptible to lightning damage.
Parmak AC powered fence chargers are equipped with lightning arresters and 1 amp fuses. This protects against lightning and poor ground damage.
Lightning damage is the number one reason why Parmak fence chargers fail. A full 3 year warranty is available. During this period, Parmak will repair or replace your fence charger. If lightning does damage your fence charger, you will be able to get it repaired for free.
Performing maintenance on your fence charger is important. You should make sure to regularly check the voltage of your battery. Some chargers are equipped with performance meters. These help you determine the shock that your fence charger delivers.
Using an electric fence tester is a good way to test your fence charger. It provides accurate results. Always read the top of the green arc on the meter to confirm that the fence charger is producing a charge.
If the charger does not produce a good charge, you may need to replace the battery. The battery should be within the recommended voltage range of 6.6 to 12.0 volts. Batteries below this voltage will require a solar panel to recharge.
Ideally, you should purchase a charger that is U/L or CSA listed. These are the safety agencies that have tested and approved electric fence chargers. Buying a fence charger without these listings is a serious risk.
Most problems with electric fences are caused by a poor installation. Poor fence wires, weeds, and vegetation can cause the most damage. Other factors include loose connections, gate openings, and rust. Using a surge protector can give extra protection.
Purchasing a Parmak fence charger can save you from the high cost of repairs. The manufacturer’s warranty covers lightning damage and the charger should perform as advertised.
If you have trouble determining the correct reading, you can call the factory and request troubleshooting information. Having an effective fence charger can ensure the safety of your livestock and property. Regardless of the model you choose, remember to use a surge protector to provide extra protection.
Low impedance fence controllers
Parmak low impedance fence controllers are ideal for a variety of purposes. They are designed to shock through vegetation, foreign materials, and even wet weeds. The best models offer a high output and are also capable of maintaining a good charge on the fence line.
When it comes to selecting a fence charger, the best one will depend on several factors, including the type of animal you’re keeping under control and the type of power source you have. If you’re using a battery powered model, you’ll want to select one with a good battery life, which means the battery should be able to last for at least three years.
Choosing a model with a performance meter is a good idea, especially if you’re using it to monitor the health of your fence. This can be a digital or analog device. A good one will tell you the most important information you need to know about your electric fence.
For example, a performance meter will be able to tell you which is the most powerful fence energizer. It can be used to measure the current output and its mileage rating. Also, it can help you figure out the voltage of your battery.
Most fence chargers come with instructions for the proper installation. You’ll need to mount the charger off the ground, and make sure it is well-protected from weather and other elements. Another consideration is the ground rod system. You’ll need at least 20,000 volts to hook up the wire.
Some models offer an exclusive performance meter. Whether it’s a digital or analog, the performance meter will be able to tell if your electric fence is working correctly.
Using an electric fence tester is the most accurate way to test your fence controller. You can test it by placing a plastic screwdriver on the red and black ground terminals. To test it correctly, you should see a reading of at least six volts. However, if you don’t see a reading, it might be time for a replacement.
If you don’t have an electric fence tester, you can check it for yourself with metal T-posts. It can be easy to make a bad connection, which will cause a squealing sound and a spark.
Troubleshooting
Electric fence chargers need routine maintenance and troubleshooting. If yours is not working correctly, you may have a problem with your energizer, your batteries or your ground system. Fortunately, you can repair or replace your charger free of charge.
First, you should check the voltage of your fence charger. You can do this with a digital volt meter. The ideal voltage is less than 300 volts.
When testing your energizer, you should also check its terminals to see if the energizer is outputting energy properly. This will help you to determine if you have a primary power outage, a fault in the energizer or if the terminals are corroded.
Another way to troubleshoot an electric fence charger is to use a fence tester. This will allow you to test the power coming from your outlets or from your battery.
Before you use a fence tester, you should first disconnect the hook-up wire from your fence. This should be a 20 KV insulated wire. It is recommended that you replace the faulty wire if it reads less than 1,500 volts.
In order to check your fence line voltage, you will need a neon or digital volt meter. After you have a good reading, you should disconnect the fence cables.
You can then plug a power source into the outlet and check its output. You should also check the voltage of the batteries. A battery that has less than 2,000 volts should be replaced.
You can also test the power of the charger using a performance meter. An analog meter will display a top green arc while a digital meter will show a battery voltage.
A low volt meter reading could indicate a blown fuse, poor battery or an inadequate ground system. For further information, contact your fence charger manufacturer or an authorized service center.
Parmak offers a one-year warranty on its fence chargers. This guarantee covers damage from lightning or defects in the equipment. Your fence charger can be returned to the factory for free repair.
In addition, the Canadian Standards Association and Underwriters Laboratories are recognized as safe safety agencies for electrical fence chargers.
