The proper functioning of an engine is very important for the smooth performance of a vehicle. If you own a car or any vehicle then you must have realized the importance of replacing or repairing many devices and accessories in an engine. So, one of the belts that you will find mostly on a vehicle’s engine is a V-belt. These v-belts can be easily purchased from Boodmo Online in India at market-leading prices.

What is V-belt?

For replacing a flat belt, the V belt was invented in the year 1917 and named so because of its V shape. These have a rubber body, polyester tension members, tension member bed and are covered with the backing fabric. It has more surface area as compared to the flat belt. Moreover, the v-belts are required for transmitting the power by the static friction on the flanks. These belts are also used for extending the service life of the engine drives. So, it is very vital to check these belts from time to time and if needed then replace them. You can buy them online at boodmo.com/catalog/3611-v_belts/

Main causes for the failure of V-Belt :

Failure of the v-belt is not good at all and it can affect the performance of your car’s engine. Hence, here we are giving you 5 main causes of v-belt failure.

Table of Contents

Improper maintenance –

One of the main causes of failure of V-belts is their poor or improper maintenance. So, these belts should have a proper amount of tension as well as a great level of friction to grip. Moreover, the belt drive should be tensioned in a correct manner, and installed with new and according parts correctly. All these factors are related to the maintenance of V-belts. Also, if you ignore maintaining these belts then they will wear out. In addition to this, the major contributors behind the worn of these belts are poor tensioning, and misalignment.

Incorrect Installation –

In the proper functioning of the V-belt tension plays a major role. For the best results, it is good that tension should be light. The belt should be installed or aligned in a proper way. The wrong arrangement of the belt will decrease the duration of the lifespan of the V-belt and can be a reason behind the problems related to stability.

Defects or flaws in design –

If a v-belt will have a defect or flaws then it will not work correctly. It may also create strange sounds and other problems as well. So, if the V-belt is not capable to work properly because of its defective design then it can be the main cause of the malfunction. There are many manufacturers who didn’t manufacture high-quality or durable belts. Thus, it is very important that you choose a reliable manufacturer selling these V-belts. Furthermore, you can buy reliable and durable V-Belts at Boodmo with timely delivery at your doorsteps.

Poor Handling –

As stated above, the flaws in the design of V-Belts can lead to their failure but if you handle it poorly then also it will not work properly. In case, after their purchasing you store it incorrectly like hanging from the hook then it will get crimped. So, it is good to store these belts on a flat surface properly until their installation. On the other hand, the excessive heat in your vehicle’s engine can also damage the V-belt. Hence, you should handle the belt with care and avoid the problem of excessive heat.

Storage –

The environment has a major effect on the V-belt such as dirty or dusty conditions, extreme heat, or low temperature. As per the experts, the ideal temperature for storing these V-belts is between 15 ºC to +25ºC. If these are stored improperly then they can break or malfunction and hence lose up to half of their estimated duration. Also, if V-belts will have much exposure to oxygen, light, extreme moisture, dirt, dust, and other contaminants then these will become unworkable.

Final Words :

Until the V-Belts are used, they should be stored in their original packaging. While installing the V-Belts you must observe safety instructions and installation regulations correctly. Additionally, it is good to purchase these belts from well-known manufacturers such as Boodmo easily.

Use a minimum exertion of force as well as special tools for its installation and avoid tools like crowbars or screwdrivers. In case, you don’t know how to install it properly then you can take the help of a mechanic so he can do it in an efficient manner. Hence, hopefully, this post will surely help in gaining more knowledge regarding the failure of V-Belts.